Hot Tub Maintenance Tips

The winter season can be the most relaxing time of year to use your Marquis hot tub, so it’s important to keep your hot tub in working order! Here are a few tips for maintaining your hot tub!

Clean the Filter(s): This is one of the most important aspects of maintaining your spa. A regular cleaning routine will help your spa’s filtration system run as efficiently as possible. It can also help to extend the lifespan of your filter(s), which may help to save money in the long run. How often you clean the filters depends on how much you use your hot tub.

Keep a spare set of hot tub filters in a clean, dry place. When you remove the dirty filters from your hot tub for cleaning and air drying, swap in your spare set from storage. Once your dirty filters are cleaned and air dried, they become your spare set for storage. Repeat this process as necessary.

Rinse Off First: Prior to entering your spa, if possible, rinse off completely in the shower. Showering removes skin residue like deodorant, lotion and makeup which can impact the cleanliness of your hot tub. Additionally, rinsing your bathing suit reduces residue from detergent and fabric softeners.

Top it Off: Regular spa usage and evaporation will gradually reduce your spa’s water level. Without people in the spa, the water should reach about two thirds of the way up the skimmer opening. If you notice the pumps “surging”- meaning repeatedly starting and stopping- it can mean your water level is too low. 

A General Guide to Pool Chemicals

Our February 20% off chemical sale is here! You may want to take advantage of the deals we have going on but are unsure of what chemicals you may need or what role they serve in the maintenance of your pool or spa. In our first blog post, we’ll be going through a general overview of the main chemicals used in pools and spas and what they do. Not every pool and spa is the same so it is always best to consult Colley’s knowledgeable pool experts when looking to purchase chemicals from us!

Chlorine: Probably the best-known pool chemical, chlorine is a sanitizer that keeps algae and bacteria at bay. It comes in liquid, powder, and tablet forms. When water reacts with chlorine, it forms hydrochloric acid, which is the compound that fights bacteria.

Shock: Shocking a pool is the act of "unbinding" or oxidizing the inactive chlorine (chloramines). Shocking can be done with increased dosages of chlorine or MPS (sodium monopersulfate) non-chlorine shock. When added to the pool, whatever chemical is used starts a process called superchlorination. Shocking the pool helps kill all the bacteria and sanitizer byproducts. Usually sold as a separate product, shock is used about once a week or every two weeks, depending on pool usage.

Bromine: This is an alternative to chlorine, but typically used in warmer water such as that used in hot tubs. Because hot tubs tend to have a higher pH level (alkalinity), and bromine works better at a higher pH level, bromine is more effective in warmer water.

Cyanuric Acid: The sun’s ultraviolet rays can speed up the decomposition of chlorine in the water. Cyanuric acid helps slow that process down by stabilizing, or protecting, the chlorine. However, there is a limit to the amount of cyanuric acid that can be in the pool: too much can also slow the destruction of bacteria. Some chlorine products come with cyanuric acid added; be sure to check before adding cyanuric acid separately.

Algaecide: Often copper-based, these polymers serve as a preventative barrier against algae. After the pool has been shocked, algaecide is added to keep the algae from returning.

Calcium chloride: Your pool requires a minimum level of calcium hardness before molecules start to look elsewhere for its minerals and eat away at your tile and metal. Calcium chloride will increase calcium hardness.